emailEmail Us: [email protected]

phoneCall Us: (206) 552-8235

AllumiaX,LLC

Load Flow Analysis by AllumiaX

Load_Flow_Offering_and_Solution

What is Load flow?

Load flow, also known as Power Flow Analysis, is an essential method to examine the problems occurring in the power systems network or grid.

Load flow Analysis is performed to determine the state of the equipment present in the network in order to ensure their operation within the specified limits. This study solves the steady operation state with node voltages and branch power flow in the power system. 

Continue reading
  417 Hits
  0 Comments
417 Hits
0 Comments

Short Circuit and System Protection Studies with AllumiaX

offering-and-solution1

AllumiaX helps commercial and industrial facilities overcome the challenges of a rapidly growing industry by offering short circuit and arc flash hazard studies. Let's take a moment to learn about the significance of power system studies collectively.

A short circuit is a fault current that introduces a large amount of energy in a power system. The reliability and safety of power distribution systems depends on the accuracy and effectiveness of protective devices.

Continue reading
  454 Hits
  0 Comments
454 Hits
0 Comments

Most Popular Posts

Short Circuit​The short circuit is essentially an abnormal condition within a power system in which a heavy amount of current flows through the circuit. A short circuit usually occurs a...
Lockout-Tagout BasicsAs stated by the Occupational Health and Safety Administration OSHA, Lockout Tagout or LOTO is a set of specific practices and procedures to safeguard employees from the unexpecte...
With the expansion of electric power in today's world, electrical power systems are exposed to many critical conditions like overvoltages and voltage surges due to lightning strikes or abrup...
In power systems, it is a common occurrence that there are unbalanced voltages and currents on the distribution side of the grid. But these voltages and currents might be unbalanced anywhere through t...
What is an Arc flash and What causes it?​Arc Flash incident is one of the most dangerous hazards faced by electricians all over the world. According to statistics, 5 to 10 arc flash explosions occur i...