emailEmail Us: [email protected]

phoneCall Us: (206) 552-8235

AllumiaX,LLC

Should You Open Energized Panel Covers?

electrical-panel-inspection-working-personnel

The practice of removing energized switchboard and panelboard covers when performing annual/quarterly/monthly maintenance has become a common place. De-energization cannot be stressed enough before all types of maintenance work on electrical equipment can be initiated. This is rarely due to the fact that the personnel are inexperienced or non-qualified for the job, but instead it's usually because of following the traditional method without question.

Continue reading
  1246 Hits
  0 Comments
1246 Hits
0 Comments

Most Popular Posts

Short Circuit​The short circuit is essentially an abnormal condition within a power system in which a heavy amount of current flows through the circuit. A short circuit usually occurs a...
Lockout-Tagout BasicsAs stated by the Occupational Health and Safety Administration OSHA, Lockout Tagout or LOTO is a set of specific practices and procedures to safeguard employees from the unexpecte...
With the expansion of electric power in today's world, electrical power systems are exposed to many critical conditions like overvoltages and voltage surges due to lightning strikes or abrup...
In power systems, it is a common occurrence that there are unbalanced voltages and currents on the distribution side of the grid. But these voltages and currents might be unbalanced anywhere through t...
What is an Arc flash and What causes it?​Arc Flash incident is one of the most dangerous hazards faced by electricians all over the world. According to statistics, 5 to 10 arc flash explosions occur i...