emailEmail Us: [email protected]

phoneCall Us: (206) 552-8235

AllumiaX,LLC

Fault Analysis in Power Systems

fault-analysis-in-power-systems

Usually, a power system operates under balanced conditions with all equipment's carrying normal load currents and also the bus voltages inside the prescribed limits. This condition can be disrupted because of fault within the system. If the electrical fault current exceeds the interrupting rating of the protective device, the consequences can be devastating. It can be a serious threat to human life and is capable of causing injury, extensive equipment damage.

Continue reading
  1439 Hits
  1 Comment
1439 Hits
1 Comment

Most Popular Posts

What is Load flow?Load flow, also known as Power Flow Analysis, is an essential method to examine the problems occurring in the power systems network or grid.Load flow Analysis is performed to determi...
Short Circuit​The short circuit is essentially an abnormal condition within a power system in which a heavy amount of current flows through the circuit. A short circuit usually occurs a...
Lockout-Tagout BasicsAs stated by the Occupational Health and Safety Administration OSHA, Lockout Tagout or LOTO is a set of specific practices and procedures to safeguard employees from the unexpecte...
With the expansion of electric power in today's world, electrical power systems are exposed to many critical conditions like overvoltages and voltage surges due to lightning strikes or abrup...
In power systems, it is a common occurrence that there are unbalanced voltages and currents on the distribution side of the grid. But these voltages and currents might be unbalanced anywhere through t...