emailEmail Us: [email protected]

phoneCall Us: (206) 552-8235

AllumiaX,LLC

Why Snubber Circuits are Required for Transformer Protection?

Engineers-can-be-employed-to-reliably-perform-transient-stability-studies-and-switching-transient-evaluations-for-power-transformer Engineers-can-be-employed-to-reliably-perform-transient-stability-studies-and-switching-transient-evaluations-for-power-transformer

Switching Transients or Transient Recovery Voltages may occur in certain situations and events occurring frequently in normal operations of a MV or HV industrial or commercial Power System. They may not be fatal in their first occurrence but prolonged exposure to transients will reduce lifespan of power system equipment. They may also disturb the stability of the power system putting the entire installation at a risk of shutdown or failure of certain equipment.

A snubber circuit is a proven way of reducing these transients and ensuring the protection of individual equipment and the wider system. Therefore, snubbers find their applications in many areas in a power system, in most cases becoming an indispensable component of it.

Continue reading
  1723 Hits
  0 Comments
1723 Hits
0 Comments

Most Popular Posts

What is Load flow?Load flow, also known as Power Flow Analysis, is an essential method to examine the problems occurring in the power systems network or grid.Load flow Analysis is performed to determi...
Short Circuit​The short circuit is essentially an abnormal condition within a power system in which a heavy amount of current flows through the circuit. A short circuit usually occurs a...
Lockout-Tagout BasicsAs stated by the Occupational Health and Safety Administration OSHA, Lockout Tagout or LOTO is a set of specific practices and procedures to safeguard employees from the unexpecte...
With the expansion of electric power in today's world, electrical power systems are exposed to many critical conditions like overvoltages and voltage surges due to lightning strikes or abrup...
In power systems, it is a common occurrence that there are unbalanced voltages and currents on the distribution side of the grid. But these voltages and currents might be unbalanced anywhere through t...